NEWS

Contact

Sandblasting Room Design

Sandblasting room is often used to remove rust, coatings, and large workpiece surface cleaning. The blast cleaning operated by the sandblasting room is environmentally friendly and cost-effective. The sandblasting rooms system. It requires a lot on the size and material to design the sandblasting room. With a complete system,  then the sandblasting equipment can work smoothly.


Sandblasting Room Ventilation

Sandblasting room ventilation is crucial throughout the process of sandblasting. Three different airflow methods are adopted to achieve sandblasting room ventilation, that is, down-draft airflow, end-to-center airflow,  and cross-draft airflow. The best ventilation method depends on the abrasives used in the sandblasting room. Among those methods, cross-draft airflow is the most economical ventilation method. The size of the dust collector is measured by the width of room times the height of room times the cross-sectional airspeed in feet/minute (fpm) equals the total airflow in cubic feet/minute (cfm).


Dust Collector for Sandblasting Room

It’s critical to consider the dust volume that will be created through the blasting process. With higher volumes of dust, the dust collector should be with a higher CFM rating,  which allows the dust to be removed effectively.


Expert Sandblasting Room Manufacturer

Qinggong Machinery is an expert sandblasting room manufacturer with more than forty years in sandblasting room design and selling. We have a professional team to design and manufacture pieces of professional sandblasting equipment. If you are interested in the sandblasting equipment prices, please feel free to contact us. We can also give you professional advice on the sandblasting room design.

NEWS

Contact