Blasting media consumption is a direct cost, as the number of cycles and transmitted energy of a blasting media affects consumption. It is generally estimated that blasting media represents approximat...Read More >
The operation of the shot blasting machine is to use the shot blasting machine to blast steel shot and steel grit onto the surface of the workpiece to be processed at high speed. Although the working ...Read More >
First, the importance of shot blasting machine application in the automotive industry.Nowadays, the car is the first choice for people to travel, and its safety performance is particularly important. ...Read More >
The pipes roller conveyor shot blasting machine is mainly used for surface cleaning of steel structural parts、profiles、steel pipes、steel plates、steel bars. This kind of shot blast machine has high efficiency and low cost.
The pipes roller conveyor shot blasting machine is mainly used to construction and other industries. It is used for eliminate stress and remove surface rust of large I-Beam and more higher dimensions H-Beam steel structures. During the cleaning process the adjustable speed roller conveyor controlled by the electricial system and then sent the steel structure and steel into the shot blasting chamber. Every surface of the workpiece are hit and rubbed by strong and intensive projectile from different coordinate directions, so that the oxide skin ,rust layer and dirt on it fall off rapidly, and the steel surface has a certain smooth and hardness, improve the adhesion between the paint film and the steel, improve the inner quality of the steel and extent its service life. It need load and unload the workpieces on the roller conveyor blast machine at both sides of the cleaning room. The abrasive and dust falling on the steel are cleaned by the pulse back blowing device. The mixture of abrasive and dust is conveyed to the chamber funnel by the recovery screw and collected in the lower part of the elevator by the vertical and horizontal screw conveyor, and then lifted to the separator on the top of the machine. The separated pure steel shot falls into the separator hopper for circulation of the shot blasting machine. The dust generated during the shot blasting is sent to the dust removal system by the exhause pipe. The purified gas is discharged to the atmosphere and the granular dust is collected in the dust removal device. The clean is discharged into the atmosphere.
As one of shot blasting supplies, with 100+ workers, 22 engineers, and a service team of 10, Qinggong have the capability to meet your requests of shot blasting and sand blasting machines. Welcome to contact us.