NEWS

Contact

Angle fitting shot blasting machine

The tumble belt shot blasting machine is the best choice to to remove the angle fittings  rust  、oxidation 、 paint or others in batch.

Angle_fitting__shot_blasting_machine1.jpg

The angle fitting tumble belt shot blasting machine is suitable for multi-variety, it can be finish Surface derusting and shot peening for mass production work pieces. The part must be cleaned without fear of collision, and castings and heat-treated which weighing less than 150 kg. The machine can be used not only as a single machine but also as a part of line. It belongs to the scope of foundry machinery. 

Working principle:

Put the angle fittings into the rubber crawler roller, the operator clicks the "Run" button, the shot blasting chamber door is pneumatically closed, the shot blasting cleaning starts, the crawler runs forward, continuously rolls, and the high-efficiency steel shot passes through the slip on the crawler Hole screw conveyor, and then convey the steel shots to the bucket elevator, which is lifted to the separator by the bucket elevator, and is stored for use after being separated. After the shot blasting is completed, the door of the shot blasting chamber is automatically opened and the track is reversed, until the work piece is unloaded. Application range are include die-casting, precision casting and precision forging, etc. They can remove oxide scale on heat treated parts, castings, forgings, strengthening of the spring , descaling and pre-treatment of fasteners.

Angle_fitting__shot_blasting_machine2.jpg

Qinggong Machinery is a professional shot blasting machine manufacture with 45 years experience and has produced more than 5000 sets of blasting machine all over the world. In our company we still insist on all machines will pre-assemble and trail-run as much as possible in our workshop. Quality is our life ,service is our mission.


NEWS

Contact