Roller conveyor shot blasting machine delivery to South America

Last week, we delivered one unit roller conveyor shot blasting machine to a South American customer. Please check the pictures.

This conveyor blast cleaning machine is a stable and commonly used shot blasting machine, which can be used to clean H steel, steel plate, I-beam, angle steel, round steel, flat steel, steel pipe, steel structure, axle, frame, radiator and other workpieces. It can achieve the effect of removing burrs, rust, surface attachments, etc., while increasing the adhesion of the surface.

The customer's workpiece is iron template, as shown in the picture.

There is a lot of cement on the surface. The customer's purpose is to use a shot blasting machine to clean up the cement and rust on the surface of the template, and then use it again after spraying. Qinggong Machinery recommends a roller shot blasting machine according to customer needs and the nature of the template. The opening size is 1500mm*300mm, and two pieces templates can be cleaned at one time.

4 units 15 kw blast turbine, blast speed can reach 1.5m/min. One day can finish 200 pieces template. Add high pressure blowing fan in the exit of the blasting machine, which will easy to remove the abrasive on the surface.

Blasting chamber manufactured in continuously welded Carbon Steel plate construction. The guard plate is secured to the cabinet walls with High Alloy steel cap nuts and are mounted in line with the abrasive blast stream. 4 layers of natural rubber protective curtain to prevent steel shot come out from blasting chamber.

Assemble a 60-ton circulation system, including longitudinal screw conveyor, crosswise screw conveyor, elevator and air wash system. Can effectively complete the separation, the steel shot can be use in the silo.

2-level dust collector system ensures that all dust generated during shot blasting can effectively enter the dust collector to meet environmental protection requirements. Dust collector with fully automatic continuous cleaning of the filter cartridges by means of compressed-air pulses which can be adjusted in their duration and frequency, extends the service time of the cartridge filter.

A mature Omron PLC system controls the operation of the entire machine, that can achieve automatic running. Each part is equipped with a detection switch to detect the operation of the equipment in real-time.

Qinggong Machinery will pre-assemble the machine together at the factory and test the machine before delivery, for a non-standard machine that is tailored by customer detailed requirements, this is the most important thing during the installation.

Qinggong Machinery has been established in 1975, relying on technology and quality to survive in china mobile sandblasting machine industry for such a long time.

Please let me know if you have requirements for a blasting machine, we can provide free technical support.