Company News

• What is the bucket elevator of shot blasting machine?
  14 03 20
  As you know that the recovery system is very important part for shot blasting machine and the recovery system is consist of screw conveyor system, elevator system, separate system and abrasive control...
• Abrasive removal system for roller conveyor shot blasting machine
  09 03 20
  After the blasting process, the workpiece may still be covered in abrasive, which must be cleaned off. This task is carried out by the abrasive removal system. This abrasive removal system mainly use ...
• Cartridge filter of the shot blasting machine
  28 02 20
  During the surface cleaning of the shot blasting machine will produce a large number of dust and distributed to the air, which will cause environmental pollution. The existence of dust collector syste...
• What is Hanger type shot blasting machine?
  28 02 20
  Hanger type shot blasting machine is a standard type of shot blasting machine. Its working cylinder diameter from 900mm to 1300mm, height from 1300mm to 3500mm. Standard machine with 2-7 tosses and th...
• More higher hardness, more abrasion resistance of steel shot?  
  21 02 20
  Steel shot is a commonly used metal workpiece processing material in shot blasting. The steel shot has a tight structure and uniform particle size. Treating the surface of a metal workpiece with the s...
• Maintenance for shot blasting machine
  21 02 20
  Daily Maintenance1.Check all the blast wheel on the shot blasting machine and the motor of the shot blasting machine are loose or not.2. Wear resistance of wear-resistant parts in shot blasting machin...
• Introduction the Abrasive Recovery System of Sand Blasting Room
  13 02 20
  Sand Blasting room is also called shot peening room or sanding room. Sand Blasting Room suitable for some large work piece surface cleaning, rust removal, increase the adhesion between the work piece ...
• Instructions for correct operation of hanger shot blasting machine
  13 02 20
  The use and operation of hanger shot blasting machine have strict procedures, and the sequence shall not be confused and reversed, otherwise mechanical accident or electrical accident may occur easily...