NEWS

Contact

What should be paid attention to about the infrastructure of the exterior steel pipes blasting machine?

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors.

Steel pipe outer wall shot blasting machine, in order to avoid damage and mutual collision when the shot blasting machine processes the workpiece, some specially treated wear-resistant rubber lifting belts are added inside the host. During operation, only the uncleaned parts are placed in the cleaning room, and the outside of the parts can be cleaned at multiple angles of 360 degrees. There are excess surface attachments on the pipe outside the cleaned product.

What should be paid attention to about the infrastructure_of_the_exterior steel pipes blasting machine 2.jpg

The inside of the fuselage is composed of shot blasting and rust removal parts. The installation angle and projection orientation of the shot blasting and rust removal parts are all carefully set, which can greatly avoid the dead corners of the uncleaned products of the fuselage and shorten the time Efficient effect. The shot blasting rust removal part is imported from foreign machinery manufacturers, which has the advantages of large shot blasting rust removal, high projection efficiency, low volume, wide orientation, and good shot blasting rust removal effect. The special partition structure can achieve good results in processing workpieces. Coupled with the convenient impeller setting, it solves the difficulty of replacing the blades of the shot blasting machine in the same industry. The blade of the tube outer wall shot blasting machine is composed of internal impellers. During the operation of the impeller, the centrifugal force makes the blades stable. Therefore, there is no need to use other tools to stabilize the blades. When replacing the blades, just gently push the outer blades. At the end, the blade can be removed from the impeller. When the blade is replaced, it only takes four minutes to see the damage of the separator.

What should be paid attention to about the infrastructure of the exterior steel pipes blasting machine 4.jpg

NEWS

Contact