- Certification: CE,ISO9001,TUV,UL,BV,ETC
- Use: Surface preparation/Smoothing/Decorative blasting/Peening/De-burring
- Port: QINGDAO/TIANJIN/SHANGHAI
Wire mesh belt shot blasting machine
Animations for mesh belt blasting machine
The machine’s housing is protected by wear-resistant manganese steel. High efficiency of the machine is enabled by the system for continued returning and cleaning of the shot blasting agent, along with efficient shot blasting turbines made from wear-resistant materials. The shot blasting machine’s size, number and power of shot blasting turbines, length of network rail conveyor on the treated object’s loading and unloading site, capacity of the conveyor and frequency regulation of turbine’s revolutions are done in accordance with the needs and specifications of the buyer.
★ ZGMn13 steel guard plate, which is hard enough to deal with the shot blasting from 35HRC to more than 55HRC.
★High impact toughness can make full use of the reflection kinetic energy of shot to continue to blast cleaning the surface of work piece, so greatly enhance the cleaning efficiency and quality.
★High chrome wear resistant cast iron grate guard plate which protect the screw conveyor and prevent big clump to get into the hopper damaging the bottom screw conveyor
Pneumatic Abrasive dosing units
• Abrasive flow is indicated at the ammeter at the electrical switch and control box.
• Adjusting the bolt on the abrasive control valve can conveniently adjust the abrasive flow rate to an required amount
• In order to be able to dismount the abrasive control unit from the silo for repair works and to avoid any abrasive outflow for each unit one manual slide is installed in front of the abrasive control unit.
Critical to achieving this efficiency is the effectiveness of the abrasive recycling plant. Poorly designed or manufactured abrasive recycling systems will not correctly recycle the abrasive and are unable to maintain the correct abrasive working mix.
Our patented abrasive separator consists of an extended rotary separator drum that will totally remove all big clumps including big wast, scrap and paint chips etc. The abrasive is then fed through a gravity air wash separator where all dust, degraded abrasive and waste is drawn out of hte good abrasive by an air current.
Only good, correctly sized abrasive is fed back to the abrasive storage hopper and blast pots for recycling.
Our patented abrasive cleaner ensures maximum recyling rates of the abrasive and high quality surface finishing is achieved.
Standard to Customs
|Max. workpiece dimension Ø x b (mm)||600x400||800x400||1000x400||1250x400||1500x400|
|wheels Number x power(kw)||4x11||4x11||4x11||4x15||4x15|
|Alternative wheels Number x power(kw)||4x15||4x15||4x15||6x7.5||6x11|
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.